Sanyo DSR-2108 System settings, BSetting the System, BClock Set, S.T./SUMMER Time P10

Remote Setup

F

System settings

Settings related to the system and time.

bSetting the System

1

2

3

4

5

6

7

1DVR ID (P37)

Sets individual designation to DVRs.

2Admin Password (P38)

This is a password for performing menu settings on the DVR unit.

Memo: The default value is "1111".

3User Password (P39)

This setting is used to give controlled operational access to administrators and general users. The operations with User Password are limited to search and playback.

Memo: No user password is set by factory default.

4Network Password (P39)

This password is for limiting the access to the network.

Memo: The default value is "1111".

5Date Format (P9)

Sets the date display format.

6Language (P11)

Sets the display language.

7Remote Controller (P41)

Allows to set an ID number (1 - 99) on the supplied remote control for its identification.

Memo: If set to the default value (0), no ID number is necessary for performing remote operations.

bClock Set

1

2

1Set Date & Time (P9)

Sets the current date and time.

2D.S.T./SUMMER TIME (P10)

Sets whether daylight saving is applicable or not.

•OFF: Daylight saving not applicable

•U.S.A.: USA daylight saving time applicable

•EU: EU daylight saving time applicable Select the GMT Area.

(+00:00 to +05:00)

•OTHER: Allows to set the start and end dates of the daylight saving period for time zones other than USA and EU.

(Begin/End)

Memo: A confirmation dialog is displayed when [Apply] (or [OK]) is clicked if the date and/or time settings have been changed.

The DVR is restarted and the date and time updated when [YES] is clicked on the confirmation dialog.

72