Main screen basic operations, Multi-screen display | Sanyo DSR-2108

Main screen basic operations

A

Switching the display mode of the screen

Allows you to select the display mode for live and playback video.

bSingle-screen display

Click the channel selection button on the operation panel or select one screen and double-click.

The video of the specified camera is displayed in single-screen.

bMulti-screen display

Click the multi-screen display on the operation panel.

The video of the cameras connected to this unit is displayed on multi-16 screen or multi-9 screen.

☞In DSR-2108, the only available multi-screen is multi-8 screen.

Memo: Double-clicking on a single-screen display returns the previous screen display.

bQuad-screen display

Click the quad-screen display button on the operation panel.

The video of the cameras connected to this unit is displayed on quad-screen.

Memo: Each time the button is clicked the video of the next four channels is displayed in order of the channel numbers.

Memo: Each time the button is clicked the display switches in turn from the multi-16 screen to the multi-9 screen (2 patterns) video.

01	02	03	04
05	06	07	08
09	10	11	12
13	14	15	16
01		02	03
04		05	06
07		08	09
10		11	12
13

01	02
03	04
13	14
15	16

05	06
07	08
09	10
11	12

	14	15
16	01	02

Memo: <About selecting a camera video>

If a live video is selected (clicked) on the quad-screen or multi-screen display, a red frame appears around the live video to indicate that it is selected.

It is necessary to select a camera to perform the following operation in quad-screen or multi-screen.

• Saving images (P57)

• PTZ dome camera operations (P58)

☞In DSR-2108, the unit of 4 screens, 1 to 4 and 5 to 8, are displayed in sequence.

• Switching the audio output (5 Audio controller: P54)

55

Image 62

Sanyo DSR-2108 Main screen basic operations, Switching the display mode of the screen, Multi-screen display

Contents

DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088 Safety precautions BDisassembly prohibited BDo not place in an unstable position BDo not touch the power plug with wet handsBDo not use during thunder/thunder storms BDo not sit on BDo not expose to extreme temperatures or humidity changes BCleaning the internal componentsBWhen the unit is set up in a rack BDo not block the cooling fans or air ducts Battery fluid leaks When disposing of this unit Power cable ×2 Remote control Main Features AccessoriesMain parts replacement timings Check that all the parts shown below are supplied About the split screen display Do not expose to shock or vibration Names and functions of parts Cooling fan Power socket Names of each part and connections Names of each part and connections LAN connection BUsing the switching hubBWithout using a switching hub Internet DHCP, Adsl connection Sanyo SSP If a system controller is connectedIf a camera is connected Except Sanyo Switching the power off Switching the power on / offSwitching the power on BExample of single-screen Pre-operation preparationBExample of multi-16 screen Pre-operation preparation Settingoutput the television system and the monitorSetting the clock Clock SET BMatching the television system of the camera PAL USA OhtersOFF BCorrecting the set time Setting the language LanguageSetting the RS-485 termination switch Sanyo SSP side Language selection Quad-screen display Monitoring the camera videosSingle-screen display Press the Multi button Monitoring the camera videosCamera sequencing Press the SEQ button once operations are complete Connection Operation SettingsOperating the PTZ dome camera Iris/Tour/Sequence operations Camera menu settingsOperating the PTZ dome camera Recording Motion recording RecordingContinuous recording Alarm recording Set the following items using the control button ~ Channel Quality Resolution Frame RateSchedule recording BCopying a set recording schedule to other channels Press the EXIT/STOP button Playing back recorded videos Recordings have been selected Playing back recorded videosIf the 4 letters are displayed in red, all the type Example Button displays the previous month of the calendar Move the cursor to the day of the first recordingMonth displayed by the calendar, pressing Memo To play the video of all the channels simultaneously Press the Enter button. Playback starts Press the Search buttonSearch menu screen is displayed First recording is played back Still image is displayed Press the Search button. The menu is displayedList is displayed Copying live videos Copying recorded video to recording mediaInserting recording media To copy onto a USB memory Playing back copied videos Copying recorded video to recording mediaCopying a playback video Still BCanceling the security lock Setting the security lockBSetting a security lock Factory default password is BSYSTEM settings P37 Configuration and function of the Menu settingsBLIVE settings P31 BRECORD settings P35 BNETWORK settings P42 Main Menu screen is displayed Configuration and function of the Menu settingsBBasic operations of the Main Menu Record menu is displayed Setting the Sequence Live settingsSetting the OSD and OSD Contrast Setting the Event Beep Live settings Setting the Alarm Duration Setting the Video Loss onSetting the HDD Error Setting the Type Sets the channel that outputs the video to MON2 terminal Setting the SEQUENCE-DWELL TimeSetting the MON2 Channel If Sequence is set to OFF Setting the Frame Rate Unit ips Record settingsSetting the Resolution Setting the Quality Record settings Setting the Load Default System settingsSetting the DVR ID Description confirmation BSettings for no password System settingsSetting an Admin Password Press the Enter button without inputting anything Setting a Network Password BRestoring the password inputSetting the User Password Setting the RS485 SET Setting the Date FormatSetting the Clock SET Setting the PTZ Control Selection 01/02/ .. /99 Setting a Remote Control IDBOperating this unit via the remote controller ID Example Setting a Client Access Network settingsSetting the Port Setting the Bandwidth Saving BIf selecting Adsl Network settingsSetting the Network Type BIf selecting Dhcp BIf selecting LAN Setting the DdnsConfirm the User ID and Password displayed on the screen Repeat 2 and change the following as necessary Setting the Send E-MAIL Mail Server Setting the NTP SETMail to Mail from Format settings HDD SET settingsSetting the Overwrite Initializes the internal hard disk HDD SET settings Setting the auto delete function Setting the Load Setup from a USB Service settingsSetting the Save Setup to a USB Displays the hard disk information Resolution 1024 × Disk capacity 10 MB Operations using the NetworkNetwork settings Network connection Installation is complete Operations using the NetworkSoftware starts installing Disconnecting Connecting to this unitBConnecting for the first time BWhen there are several connections Main screen structure and function of each part Main screen structure and function of each part Multi-screen display Switching the display mode of the screenMain screen basic operations DSR-2108, the only available multi-screen is multi-8 screen Main screen basic operations BSequence camera switch displayBSwitching recording functions Recording live video BRecording method Saving images Freezing the live videoAudio is output BFor Pan/Tilt operations Sets the menu using this unitOperating the PTZ dome camera BFor Zoom/Focus operations END Point Search mode operationsStart Point Back UP Search mode operations Searching and playing recorded video Backing up DVR recorded video Setup menu settings General settings General BModify the registered content Modify Setup menu settingsCamera designation settings Site BRegistering the additional DVR Addition Event settings Event Event log search, view, save Log View Version information About Record settings RecordDisk settings Disk Clicking Cancel Remote SetupRemote Setup operating procedure Clicking Apply OSD Remote SetupBCommon settings General BChannel-specific settings BSetting an alarm input terminal Setting the Alarm-SetBAlarm Out BSetting an alarm output terminal If Sequence is set to on Setting the Monitor2If Sequence is set to OFF Setting the Record BResolution Common to all channels Click the Timer Set button BSetting the detection frameBSetting the Schedule recording Click or drag a grid cell in the desired detection frame BClock Set System settingsBSetting the System S.T./SUMMER Time P10 RS-485 DescriptionBPTZ Control Data Speed BNetwork settings Setting the NetworkBDDNS settings Return Mail Address Setting the NTPSetting the Storage NTP USE Operations using the Web browser BFunctions of the main operation panel Operations using the Web browser BFunctions of the search operation panel Click the Capture button BSaving still images to the PCBSaving moving videos to the PC Select the Channel 2 to be saved Click the OK 3 button Part names of the remote control Dimensions of DSR-2116 and DSR-2108 are the same SpecificationsBDimensions unit mm BDVR ID input display list Mounting the hard disk S-ATA HDD 1 HDD Memo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD