Sanyo DSR-2108 instruction manual Part names of the remote control

Part names of the remote control

Batteries for the remote control are not supplied. Use two AAA batteries.

REC/STOP ALARM

1

1 2 3

3

4 5 6

7 8 9

4ID 0 10

5

6

9	MENU		EXIT
F		SERCH
H
			MARK
I	PTZ	LOCK	COPY
L	SEQ	QUAD MULTI

bInserting batteries in the remote control.

1Take the battery cover off.

2

2Place the batteries and fit the cover.

7

8

G Note: Make sure the batteries are correctly oriented.

JbOperation range

K

M
N
Max. 5 m
30°	30°

1REC/STOP button

Stops and starts recording of live videos displayed on the monitor.

2ALARM button

Switches ALARM OUT to ENABLE/DISABLE.

3Numeric buttons

Used to input passwords, camera number and ID number.

4ID button

If a remote control ID number was set, press before inputting it. (P41)

5 • SKIP button

During settings: Moves the cursor upward.

During playback: Skips the video 1 minute forward.

6 • f button

During settings: Moves the cursor to the left.

During playback: Fast rewinds. 7 • e button

During settings: Moves the cursor to the right.

During playback: Fast forwards.

8REPLAY • button

During settings: Moves the cursor downward.

During playback: Skips the video 1 minute backward.

9ENTER • c/h button

During settings: Confirms the selected item.

During search: Plays back the selected video.

During playback: Displays a still video.

FMENU button

Displays the setting menu screen.

GEXIT button (b)

To exit the settings mode and the menu screen.

HSEARCH button

Activates the recorded videos search mode.

IPTZ button

Activates the operation mode that operates the Pan/Tilt/ Zoom/Focus of PTZ dome cameras.

JLOCK button

Switches security lock to ON/OFF.

KMARK • COPY button Activates the video saving mode.

LSEQ button

Sequences the videos of the connected cameras.

MQUAD button

Displays the quad-screen.

Each time the button is clicked the video of the next four channels is displayed in order of the channel numbers.

NMULTI button Displays a multi-screen.

79