Sanyo DSR-2108 Pre-operation preparation, Settingoutput the television system and the monitor

Pre-operation preparation

2

1

3 9

ASettingoutput the television system and the monitor

If the television system of the camera to be connected and the type of monitor differ, live videos cannot be monitored on the normal screen. Check the specifications of the equipment to be connected and set the system changeover switch on the rear panel.

•Do not forget to turn off the power when adjusting the settings.

BSetting the clock (CLOCK SET)

1Press the MENU button.

The PASSWORD input screen is displayed.

:A 2% 2009/05/03 09:04:54

bMatching the television system of the camera (PAL)

PASSWORD

- - - -

CH1

Up: When using a NTSC camera

Down: When using a PAL camera

Cannot be used when PAL and NTSC system are mixed.

bSelecting the type of monitor (VGA)

Up: When connecting the general monitor to the video output terminal

Down: When connecting a PC monitor to the VGA terminal

Generic monitors PC monitors

The VGA terminal and the video output terminal cannot be used simultaneously.

•To return to the previous screen, press the EXIT/ STOP button.

2Enter the "ADMIN PASSWORD" using the channel selection buttons.

The MAIN MENU screen is displayed.

•"1111" is the factory default setting password.

1 ~	:A	2% 2009/05/03 09:04:54
	10

PASSWORD

* * * *

- - - -

CH1

MAIN MENU

LIVE	RECORD	SYSTEM
NETWORK	HDD SET	SERVICE

9