Sanyo DSR-2108 instruction manual BRestoring the password input, Setting the User Password

SYSTEM settings

D

bRestoring the password input

1Press the MENU button, select SYSTEM and press the ENTER button.

2Select "ADMIN PASSWORD" using the control button ({) and press the ENTER button.

The "Current" password input screen is displayed.

ADMIN PASSWORD

Current:

- - - -

3Press the ENTER button without inputting anything.

The "New" password input screen is displayed.

4Input the new password using the camera selection buttons and press the ENTER button.

The "Confirm" password input screen is displayed.

ADMIN PASSWORD

New: * * * *

- - - -

ESetting the USER PASSWORD

This setting is used to give controlled operational access to administrators and general users. The operations with USER PASSWORD are limited to search and playback.

No user password is set by factory default. Set a password different from ADMIN PASSWORD.

1Select "USER PASSWORD" using the control button ({) and press the ENTER button.

The "Current" password input screen is displayed.

2The following setting method is identical to the one described in "Setting an ADMIN PASSWORD".

USER PASSWORD

Current:

- - - -

FSetting a NETWORK PASSWORD

A password can be set to limit the access to the network for network users. The initial value is "1111".

1Select "NETWORK PASSWORD" using the control button ({) and press the ENTER button.

The "Current" password input screen is displayed.

2The following setting method is identical to the one described in "Setting an ADMIN PASSWORD".

NETWORK PASSWORD

ADMIN PASSWORD	Current: * * * *
	- - - -

Confirm: * * * *

- - - -

5Enter the same password as in "New" using the camera selection button and press the ENTER button.

The message "PASSWORD CHANGED!!" is displayed so press the ENTER button.

To go to the live screen, press the EXIT/STOP button.

39