Description, BPTZ Control, RS-485, Data Speed | Sanyo DSR-2108

Remote Setup

GDescription

This sub menu is accessible from the System settings. Allows to check information on the DVR such as the version information.

•H/W Version

•S/W Version

•Storage Size: Hard disk capacity

•IP Address

•MAC Address

•Time Count

•HDD A USE TIME: Master hard disk

•HDD B USE TIME: Slave hard disk (expansion)

HSetting the PTZ Control

This sub menu is accessible from the System settings.

Allows to set the communication environment for remotely operating PTZ dome cameras connected to RS485 terminals.

bPTZ Control

1

2

3

4

1DATA SPEED

Sets the communication speed.

The set value applies to all channels.

2Camera channel designation

3Protocol

Sets the protocol type for the specified channel.

When connecting multiple cameras, set the same protocol for all.

4Address

Sets the camera ID (0 - 63).

bRS-485

Set when connecting a system controller or cameras using SANYO protocol.

1

2

1DATA SPEED

Sets the RS-485 communication speed (2400/4800/9600/ 19200).

2Address

Sets the address (0 - 128) of the RS-485 control terminal.

73

Image 80

Sanyo DSR-2108 instruction manual Description, BPTZ Control, RS-485, Data Speed

Contents

DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088 Safety precautions BDisassembly prohibited BDo not touch the power plug with wet hands BDo not use during thunder/thunder stormsBDo not place in an unstable position BDo not sit on BCleaning the internal components BWhen the unit is set up in a rackBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ducts Battery fluid leaks When disposing of this unit Main Features Accessories Main parts replacement timingsPower cable ×2 Remote control Check that all the parts shown below are supplied About the split screen display Do not expose to shock or vibration Names and functions of parts Cooling fan Power socket Names of each part and connections LAN connection BUsing the switching hub BWithout using a switching hubNames of each part and connections Internet DHCP, Adsl connection If a system controller is connected If a camera is connectedSanyo SSP Except Sanyo Switching the power off Switching the power on / offSwitching the power on BExample of single-screen Pre-operation preparationBExample of multi-16 screen Settingoutput the television system and the monitor Setting the clock Clock SETPre-operation preparation BMatching the television system of the camera PAL USA OhtersOFF Setting the language Language Setting the RS-485 termination switch Sanyo SSP sideBCorrecting the set time Language selection Quad-screen display Monitoring the camera videosSingle-screen display Monitoring the camera videos Camera sequencingPress the Multi button Press the SEQ button once operations are complete Connection Operation SettingsOperating the PTZ dome camera Iris/Tour/Sequence operations Camera menu settingsOperating the PTZ dome camera Recording Motion recording RecordingContinuous recording Alarm recording Set the following items using the control button ~ Channel Quality Resolution Frame RateSchedule recording BCopying a set recording schedule to other channels Press the EXIT/STOP button Playing back recorded videos Playing back recorded videos If the 4 letters are displayed in red, all the typeRecordings have been selected Example Move the cursor to the day of the first recording Month displayed by the calendar, pressingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneously Press the Search button Search menu screen is displayedPress the Enter button. Playback starts First recording is played back Still image is displayed Press the Search button. The menu is displayedList is displayed Copying recorded video to recording media Inserting recording mediaCopying live videos To copy onto a USB memory Copying recorded video to recording media Copying a playback videoPlaying back copied videos Still Setting the security lock BSetting a security lockBCanceling the security lock Factory default password is Configuration and function of the Menu settings BLIVE settings P31 BRECORD settings P35BSYSTEM settings P37 BNETWORK settings P42 Configuration and function of the Menu settings BBasic operations of the Main MenuMain Menu screen is displayed Record menu is displayed Live settings Setting the OSD and OSD ContrastSetting the Sequence Setting the Event Beep Live settings Setting the Video Loss on Setting the HDD ErrorSetting the Alarm Duration Setting the Type Setting the SEQUENCE-DWELL Time Setting the MON2 ChannelSets the channel that outputs the video to MON2 terminal If Sequence is set to OFF Record settings Setting the ResolutionSetting the Frame Rate Unit ips Setting the Quality Record settings System settings Setting the DVR IDSetting the Load Default Description confirmation System settings Setting an Admin PasswordBSettings for no password Press the Enter button without inputting anything Setting a Network Password BRestoring the password inputSetting the User Password Setting the Date Format Setting the Clock SETSetting the RS485 SET Setting the PTZ Control Selection 01/02/ .. /99 Setting a Remote Control IDBOperating this unit via the remote controller ID Example Network settings Setting the PortSetting a Client Access Setting the Bandwidth Saving Network settings Setting the Network TypeBIf selecting Adsl BIf selecting Dhcp Setting the Ddns Confirm the User ID and Password displayed on the screenBIf selecting LAN Repeat 2 and change the following as necessary Setting the Send E-MAIL Setting the NTP SET Mail toMail Server Mail from HDD SET settings Setting the OverwriteFormat settings Initializes the internal hard disk HDD SET settings Setting the auto delete function Service settings Setting the Save Setup to a USBSetting the Load Setup from a USB Displays the hard disk information Operations using the Network Network settingsResolution 1024 × Disk capacity 10 MB Network connection Installation is complete Operations using the NetworkSoftware starts installing Connecting to this unit BConnecting for the first timeDisconnecting BWhen there are several connections Main screen structure and function of each part Main screen structure and function of each part Switching the display mode of the screen Main screen basic operationsMulti-screen display DSR-2108, the only available multi-screen is multi-8 screen BSequence camera switch display BSwitching recording functionsMain screen basic operations Recording live video BRecording method Saving images Freezing the live videoAudio is output Sets the menu using this unit Operating the PTZ dome cameraBFor Pan/Tilt operations BFor Zoom/Focus operations Search mode operations Start PointEND Point Back UP Search mode operations Searching and playing recorded video Backing up DVR recorded video Setup menu settings General settings General Setup menu settings Camera designation settings SiteBModify the registered content Modify BRegistering the additional DVR Addition Event settings Event Event log search, view, save Log View Version information About Record settings RecordDisk settings Disk Remote Setup Remote Setup operating procedureClicking Cancel Clicking Apply OSD Remote SetupBCommon settings General BChannel-specific settings Setting the Alarm-Set BAlarm OutBSetting an alarm input terminal BSetting an alarm output terminal If Sequence is set to on Setting the Monitor2If Sequence is set to OFF Setting the Record BResolution Common to all channels BSetting the detection frame BSetting the Schedule recordingClick the Timer Set button Click or drag a grid cell in the desired detection frame System settings BSetting the SystemBClock Set S.T./SUMMER Time P10 Description BPTZ ControlRS-485 Data Speed BNetwork settings Setting the NetworkBDDNS settings Setting the NTP Setting the StorageReturn Mail Address NTP USE Operations using the Web browser BFunctions of the main operation panel Operations using the Web browser BFunctions of the search operation panel BSaving still images to the PC BSaving moving videos to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 button Part names of the remote control Specifications BDimensions unit mmDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display list Mounting the hard disk S-ATA HDD 1 HDD Memo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD