Monitoring the camera videos, Quad-screen display

Monitoring the camera videos

D B C

ASingle-screen display

Displays the video of the camera specified using the channel selection button on single-screen.

Example: Displaying camera 2 on single-screen

Press "2" on the camera selection button.

BQuad-screen display

Displays the 4 cameras video connected at once.

1Press the QUAD button.

The videos of cameras 1 - 4 are displayed on quad-screen.

The video of camera 2 is displayed on single-screen.			:A		2%	2009/05/03	09:04:54
:A	2%	2009/05/03 09:04:54
2
			CH1	C	C	CH2
				C	C
			CH3			CH4

CH2		2 Press the QUAD button again.
	C	2 Press the QUAD button again.
	C
		The videos of cameras 5-8 are displayed on
		quad-screen.
		Each time pressing the QUAD button, the video of the
		camera changes as the quad-screen.

DSR-2116
01	02
03	04
13	14
15	16

05	06
07	08
09	10
11	12

DSR-2108
01	02	05	06
03	04	07	08
			12

Page 19

Image 19

Sanyo DSR-2108 instruction manual Monitoring the camera videos, Single-screen display, Quad-screen display

Contents

DSR-2116 DSR-2108 Table of Contents Licensed Under U.S. Patent No ,974,088 Safety precautions BDisassembly prohibited Safety precautions BDo not sit on BDo not touch the power plug with wet handsBDo not use during thunder/thunder storms BDo not place in an unstable position BDo not block the cooling fans or air ducts BCleaning the internal componentsBWhen the unit is set up in a rack BDo not expose to extreme temperatures or humidity changes When disposing of this unit Battery fluid leaks Check that all the parts shown below are supplied Main Features AccessoriesMain parts replacement timings Power cable ×2 Remote control Do not expose to shock or vibration About the split screen display Names and functions of parts Names of each part and connections Cooling fan Power socket Internet DHCP, Adsl connection LAN connection BUsing the switching hubBWithout using a switching hub Names of each part and connections Except Sanyo If a system controller is connectedIf a camera is connected Sanyo SSP Switching the power on Switching the power on / offSwitching the power off BExample of multi-16 screen Pre-operation preparationBExample of single-screen BMatching the television system of the camera PAL Settingoutput the television system and the monitorSetting the clock Clock SET Pre-operation preparation OFF OhtersUSA Language selection Setting the language LanguageSetting the RS-485 termination switch Sanyo SSP side BCorrecting the set time Single-screen display Monitoring the camera videosQuad-screen display Press the SEQ button once operations are complete Monitoring the camera videosCamera sequencing Press the Multi button Operating the PTZ dome camera SettingsConnection Operation Operating the PTZ dome camera Camera menu settingsIris/Tour/Sequence operations Recording Continuous recording RecordingMotion recording Set the following items using the control button ~ Alarm recording Schedule recording Resolution Frame RateChannel Quality Press the EXIT/STOP button BCopying a set recording schedule to other channels Playing back recorded videos Example Playing back recorded videosIf the 4 letters are displayed in red, all the type Recordings have been selected Memo To play the video of all the channels simultaneously Move the cursor to the day of the first recordingMonth displayed by the calendar, pressing Button displays the previous month of the calendar First recording is played back Press the Search buttonSearch menu screen is displayed Press the Enter button. Playback starts List is displayed Press the Search button. The menu is displayedStill image is displayed To copy onto a USB memory Copying recorded video to recording mediaInserting recording media Copying live videos Still Copying recorded video to recording mediaCopying a playback video Playing back copied videos Factory default password is Setting the security lockBSetting a security lock BCanceling the security lock BNETWORK settings P42 Configuration and function of the Menu settingsBLIVE settings P31 BRECORD settings P35 BSYSTEM settings P37 Record menu is displayed Configuration and function of the Menu settingsBBasic operations of the Main Menu Main Menu screen is displayed Setting the Event Beep Live settingsSetting the OSD and OSD Contrast Setting the Sequence Live settings Setting the Type Setting the Video Loss onSetting the HDD Error Setting the Alarm Duration If Sequence is set to OFF Setting the SEQUENCE-DWELL TimeSetting the MON2 Channel Sets the channel that outputs the video to MON2 terminal Setting the Quality Record settingsSetting the Resolution Setting the Frame Rate Unit ips Record settings Description confirmation System settingsSetting the DVR ID Setting the Load Default Press the Enter button without inputting anything System settingsSetting an Admin Password BSettings for no password Setting the User Password BRestoring the password inputSetting a Network Password Setting the PTZ Control Setting the Date FormatSetting the Clock SET Setting the RS485 SET BOperating this unit via the remote controller ID Example Setting a Remote Control IDSelection 01/02/ .. /99 Setting the Bandwidth Saving Network settingsSetting the Port Setting a Client Access BIf selecting Dhcp Network settingsSetting the Network Type BIf selecting Adsl Repeat 2 and change the following as necessary Setting the DdnsConfirm the User ID and Password displayed on the screen BIf selecting LAN Setting the Send E-MAIL Mail from Setting the NTP SETMail to Mail Server Initializes the internal hard disk HDD SET settingsSetting the Overwrite Format settings Setting the auto delete function HDD SET settings Displays the hard disk information Service settingsSetting the Save Setup to a USB Setting the Load Setup from a USB Network connection Operations using the NetworkNetwork settings Resolution 1024 × Disk capacity 10 MB Software starts installing Operations using the NetworkInstallation is complete BWhen there are several connections Connecting to this unitBConnecting for the first time Disconnecting Main screen structure and function of each part Main screen structure and function of each part DSR-2108, the only available multi-screen is multi-8 screen Switching the display mode of the screenMain screen basic operations Multi-screen display Recording live video BRecording method BSequence camera switch displayBSwitching recording functions Main screen basic operations Audio is output Freezing the live videoSaving images BFor Zoom/Focus operations Sets the menu using this unitOperating the PTZ dome camera BFor Pan/Tilt operations Back UP Search mode operationsStart Point END Point Searching and playing recorded video Search mode operations Backing up DVR recorded video General settings General Setup menu settings BRegistering the additional DVR Addition Setup menu settingsCamera designation settings Site BModify the registered content Modify Event log search, view, save Log View Event settings Event Disk settings Disk Record settings RecordVersion information About Clicking Apply Remote SetupRemote Setup operating procedure Clicking Cancel BCommon settings General BChannel-specific settings Remote SetupOSD BSetting an alarm output terminal Setting the Alarm-SetBAlarm Out BSetting an alarm input terminal If Sequence is set to OFF Setting the Monitor2If Sequence is set to on BResolution Common to all channels Setting the Record Click or drag a grid cell in the desired detection frame BSetting the detection frameBSetting the Schedule recording Click the Timer Set button S.T./SUMMER Time P10 System settingsBSetting the System BClock Set Data Speed DescriptionBPTZ Control RS-485 BDDNS settings Setting the NetworkBNetwork settings NTP USE Setting the NTPSetting the Storage Return Mail Address BFunctions of the main operation panel Operations using the Web browser BFunctions of the search operation panel Operations using the Web browser Select the Channel 2 to be saved Click the OK 3 button BSaving still images to the PCBSaving moving videos to the PC Click the Capture button Part names of the remote control BDVR ID input display list SpecificationsBDimensions unit mm Dimensions of DSR-2116 and DSR-2108 are the same HDD 1 HDD Mounting the hard disk S-ATA Memo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD

Sanyo DSR-2108 Monitoring the camera videos, Single-screen display, Quad-screen display

Models: DSR-2108

Monitoring the camera videos

ASingle-screen display

BQuad-screen display

1Press the QUAD button.

2 Press the QUAD button again.