Sanyo DSR-2108 instruction manual Network settings, Setting the Port, Setting a Client Access

NETWORK settings

Press the MENU button and input the password.

The MAIN MENU is displayed, select "NETWORK" using the control button ({}~).

MAIN MENU

LIVERECORD SYSTEM

NETWORK HDD SET SERVICE

NETWORK

PORT	5445
CLIENT ACCESS	ON
BANDWIDTH SAVING	ON
NETWORK TYPE	LAN
IP	0.0.0.0
SUBNET MASK	0.0.0.0
GATEWAY	0.0.0.0
DNS	0.0.0.0
DDNS	OFF
SEND E-MAIL	OFF
NTP SET	OFF

ASetting the PORT

When connecting this unit to a multiple unit network, set an individual port number.

1Select "PORT" using the control button ({) and press the ENTER button.

The "PORT" screen is displayed. The initial value is 5445.

PORT

5 4 4 5

- - - - -

2Select a value using the control button ({), and select a port number by repeating the operation using the control button (}~).

3Press the EXIT/STOP button once operations are complete.

BSetting a CLIENT ACCESS

To give permission to operate from an external PC.

Select "CLIENT ACCESS" using the control button ({), and set "ON" using the control button (}~).

ON: Accessing the unit via a PC using the supplied exclusive software

OFF: Does not allow access

CSetting the BANDWIDTH SAVING

Set if the network bandwidth is not large enough when monitoring live videos.

Select "BANDWIDTH SAVING" using the control button ({), and set the settings using the control button (}~).

ON: Live videos advance frame by frame (At the rate of 1 frame per second)

OFF: Does not limit the network bandwidth

42