Sanyo DSR-2108 instruction manual Setting the Send E-MAIL

NETWORK settings

5Enter the "USER ID" and "PASSWORD" confirmed on the DDNS SERVER SET screen and click the Login button.

The domain name registration screen is displayed. Enter the "USER ID" and "PASSWORD" in capital letters.

6Enter the domain name to be used and click the Submit button.

The domain name is registered to the DDNS server.

7Return to the DDNS SERVER SET screen of this unit and enter the registered domain name.

Select the input location using the control button (}~) and select a character using the control button ({).

DDNS SERVER SET

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -

USER ID XX-XX-XX-XX-XX-XX

PASSWORD XXXX-XXXX-XXXX

LOG ready

8Press the ENTER button.

The DDNS settings complete, the screen returns to the NETWORK screen.

FSetting the SEND E-MAIL

An E-mail can be sent to a specified IP address.

1Select "SEND E-MAIL" using the control button

({), select "ON" using the control button (}~) and press the ENTER button.

The SEND E-MAIL screen is displayed.

SEND E-MAIL

IP NOTIFICATION	OFF
EVENT ALARM	OFF
MAIL TO
MAIL SERVER
USER
PASSWORD
MAIL FROM

•ON: Enable the sending e-mail function

•OFF: Disable the sending e-mail function

2Select the following item using the control button ({) and select the setting using the control button (}~).

•IP NOTIFICATION:

ON: Does not send a notification E-mail even when an event alarm is triggered.

OFF: Does not send an E-mail

•EVENT ALARM:

OFF: Does not send a notification E-mail even when an event alarm is triggered.

ALARM:

Anotification e-mail is sent when ALARM recording is triggered by the sensor connected to the external alarm input terminal (ALARM IN) of the unit.

MOTION:

Anotification e-mail is sent when MOTION recording is triggered by a movement detected by the motion sensor built into the unit.

ALL:

Anotification e-mail is sent when a recording is triggered either by an external alarm or the built-in motion sensor.

Memo: EVENT ALARM requires setting of ALARM-SET. (P32)

3Select the following item using the control button ({) and set the information, such as the E-mail address, using the control button ({}~).

Pressing the EXIT/STOP button returns the screen to the SEND E-MAIL screen.

45