Operations using the Network

This unit can be operated from a PC screen by using the supplied network operation software "Sanyo DVR Utility 2000S".

Prior to performing network operations make the following preparations.

Connection and settings

Network connection:

Connect this unit and the PC using a LAN or Internet connection. (P5)

Network settings:

Set the network connection settings on the NETWORK screen of this unit. (P42)

The IP address and other settings on the PC must be appropriate for the connection.

The maximum number of PCs that can be connected to one DVR is 4.

Installing "Sanyo DVR Utility 2000S"

Install using the interactive screen.

1Insert the supplied CD-ROM in the CD drive and double-click "Sanyo Client.exe".

The installer runs.

2Confirm the installation destination folder on the "Choose Destination Location" screen and click [Next].

To change the installation destination folder, click [Browse] and select a folder.

Operating environment

CPU: Intel Pentium4 1.2 GHz or higher

Memory: Windows VISTA: Minimum 512 MB (1 GB or higher recommended) Windows XP: Minimum 256 MB (512 MB or higher recommended)

VGA: 16 MB (64 MB recommended)

Resolution: 1024 × 768

Disk capacity: 10 MB

(More than 2.1GB when using Sanyo recording software)

• Operating System:

Windows VISTA,

Windows XP Professional SP2/Windows XP Home

Direct X: Direct X 8.1 or above

50

Page 57
Image 57
Sanyo DSR-2108 Operations using the Network, Network connection, Network settings, Resolution 1024 × Disk capacity 10 MB