Sanyo DSR-2108 instruction manual Recording

Recording

1 2

This unit allows the following recording modes.

Select the recording mode, recording resolution, frame rate and video quality from "RECORD" under the MAIN MENU. (P35)

The symbol on the right side of each recording mode (Ex: R) is displayed while recording is in progress.

bTypes of recording modes
A Real time recording (R)	P16
Records manually videos being monitored.
B CONTINUOUS recording (C)	P17
Records continuously when this unit is turned on.
C MOTION recording (M)	P17

Records when set off by the motion sensor integrated in this unit.

D ALARM recording (A) P18

Records when set off by a sensor connected to the external alarm terminal (ALARM IN) of this unit.

E SCHEDULE recording P19

Records according to the daily time slot set under the TIMER SET screen of the recording settings.

•The initial screen requests a password. (P38)

•It is possible to cancel the password request. See "Settings for no password" (P38)

Memo: Setting the OVERWRITE (P47)

ON: Continues recording by overwriting earlier data even when the hard disk capacity is full.

OFF: Stops recording operations once the hard disk capacity is full.

AReal time recording

1To manually start recording, press the REC/STOP button while monitoring live video.

"R" is displayed on the recording display and recording starts.

:A 2% 2009/05/03 09:04:54

CH1 R

Memo: When operated manually, the unit records according to the settings for real time recording (REAL-TIME REC SET). (P36)

2Press the REC/STOP button once operations are complete.

"R" disappears from the recording display and real time recording is stopped.

•When recording rate is high, the audio may be difficult to hear at the time of playback and playback time may increase.

•Recording time varies depending on the screen being recorded. Furthermore, recording rate may decrease depending on the settings.

16