Sanyo DSR-2108 Remote Setup operating procedure, Clicking Apply, Clicking OK, Clicking Cancel

Remote Setup

The menu settings for the DVR unit can be set from a PC, via network.

A Remote Setup operating procedure

1 Click the MENU button on the operation panel.	5 Click [Apply] or [OK].
The [Setup] screen is displayed.	The "Remote-Setup Success" message is displayed
	on the [Success] dialog and the setting sent to the DVR.
	Click [OK] and close the dialog.

2Click [DVR] at the lower left of the screen. The [Remote Setup] screen is displayed.

Memo: Remote setup may not be supported depending on the DVR model. In that case, clicking [DVR] will display an error message.

3Selectlist. and click the menu item to set from the tree The specified menu screen is displayed.

4Set the menu item displayed on the screen. Setting is basically the same as with the DVR menu setting.

Refer to the corresponding pages for details on the setting items.

1 2 3

1Clicking [Apply]:

The [Remote Setup] screen remains displayed even after the [Success] dialog is closed.

Close the [Remote Setup] screen by clicking [OK] upon completing all of the remote setup operations.

2Clicking [OK]:

Closing the [Success] dialog also closes the [Remote Setup] screen.

3Clicking [Cancel]:

If a setting value has been changed on the screen, a dialog confirming whether to save or not the changes is displayed.

Selecting [No] returns the setting to the previous value and closes the [Remote Setup] screen.

Clicking [Yes] displays the "Remote-Setup Success" message on the [Success] dialog and sends the settings to the DVR.

Closing the [Success] dialog also closes the [Remote Setup] screen.

66