Sanyo DSR-2108 If a system controller is connected, If a camera is connected, Sanyo SSP

Names of each part and connections

Connecting to the RS-485 control terminal

Remote systems such as system controllers and PTZ dome cameras are connected to the RS-485 control terminal. Check the manufacturer of the units to be connected and connect the units to the appropriate terminal signals (A/B).

1 2 3 4

RS-485/422

1	A (SANYO SSP)	To connect a Sanyo PTZ dome camera or
		system (SANYO SSP) controller
2	B (SANYO SSP)
3	A (EXCEPT SANYO)	To connect a third-party camera
4	B (EXCEPT SANYO)

If a system controller is connected

This unit can be operated through the controller.

System controller

Memo: • The setting of the RS-485 screen on the system setting is necessary when a system controller is connected. (P40)

•Refer to the System controller’s instruction manual for more information about the operation method.

If a camera is connected

If a PTZ dome camera equipped with a RS-485 control terminal is connected, the camera can be directly operated through this unit.

Memo: The settings on the PTZ CONTROL screen and RS-485 SET screen in the system setting are necessary when a camera is connected. (P14, 40)

•Connection to the RS-485 control terminal is unnecessary for coaxial superimposed type (COAX) cameras. Select a protocol for COAX in the PTZ CONTROL settings. (P14)

6