Sanyo DSR-2108 instruction manual BSetting the detection frame, BSetting the Schedule recording

Remote Setup

bSetting the detection frame

Set the zone where the motion sensor will be active.

1Set [Motion Zone] to "PARTIAL ZONE". A button is displayed to the right.

2Click the button.

The screen for setting the detection frame is displayed.

3Click (or drag) a grid cell in the desired detection frame.

The sensor is set in the specified frame.

bSetting the SCHEDULE recording

Set the schedule for the SCHEDULE recording.

1Click the [Timer Set] button.

The [Schedule] screen is displayed.

1

2

2Select a recording mode button 1 and click it. The selected recording mode is displayed in colour at the upper left corner of the schedule 2.

3Specify the day of the week and time slot, and click (or drag) the grid cell of the schedule.

Recording is scheduled for the specified time slot. Multiple recording modes can be combined using the same procedure.

Memo: To schedule the selected recording mode for all of the time slots (24 hours) of a day, click the button of the day of the week.

4Click [OK].

The contents of the setting are saved and the screen for setting the detection frame closed.

4Click [OK].

The contents of the setting are saved and the [Schedule] screen closed.

71