Sanyo DSR-2108 Live settings, BFunction of the menu operation button, Setting the Sequence

LIVE settings

Press the MENU button and enter the ADMIN PASSWORD.

The MAIN MENU is displayed, select "LIVE" using the control button ({}~).

MAIN MENU

LIVE	RECORD	SYSTEM
NETWORK	HDD SET	SERVICE

	LIVE
A
	OSD	ON
	SEQUENCE	ON
B	SEQUENCE-DWELL TIME	2 SECONDS
C	EVENT BEEP	OFF
	OSD CONTRAST	90%
	CHANNEL		1	CH1
D	DISPLAY	ON
	BRIGHTNESS	50%
	CONTRAST	50%
	HUE	50%
E	SATURATION	50%
	ALARM-SET
F	MON2-OUT

bFunction of the menu operation button

1 2 3

4 5 6 7

1MENU: The MAIN MENU is displayed once the password is input using the buttons.

2{: Press to move the cursor upward.

3EXIT/STOP: Press repeatedly once the menu operations are complete.

4}: Press to select a setting value.

5ENTER: Press to enter the setting screen, select and confirm.

6: Press to move the cursor down.

7~: Press to select a setting value.

ASetting the OSD and OSD CONTRAST

Displays information such as the date and camera channel and sets the character contrast on the screen.

1Select "OSD" using the control button ({) and select ON or OFF using the control button (}~).

ON: The date and time, as well as the channel, are displayed on the screen.

OFF: Characters and symbols are not displayed (At playback, date and time as well as channel are displayed even if set to OFF).

2Select "OSD CONTRAST" using the control button ({) and adjust the character contrast using the control button (}~).

The display bar (20 - 100 %) changes and the contrast of the real time character display changes.

BSetting the SEQUENCE and

SEQUENCE-DWELL TIME

To set the sequence and the sequence interval of the screen.

1Select "SEQUENCE" using the control button ({) and select ON using the control button (}~).

ON: Sequencing is performed on a single or quad-screen (When live).

OFF: Sequencing is not performed.

2Select "SEQUENCE-DWELL TIME" using the control button ({) and select a sequence interval using the control button (}~).

Selections: 1, 2, 3 - 58, 59, 60 SECONDS

CSetting the EVENT BEEP

To set the alarm sound when motion recording or alarm recording is triggered.

Select "EVENT BEEP" using the control button ({) and select ON or OFF using the control button (}~).

ON: The alarm sound is generated when an alarm is triggered.

OFF: The alarm sound is not triggered.

31