Panasonic VL-SV30BX, VL-MV30BX operating instructions Conversation Problem Cause & Solution

			Help
N Conversation
Problem	Cause & Solution		Page
Sound cuts in/out or fades.	LThe surroundings of the main monitor station or the door		11
	station are noisy. Try “Press-to-talk” mode.
Your voice cannot be heard by	LWhen	is displayed, the “Press-to-talk” mode is activated.	11
the outside visitor. (Visitor’s voice	Only while pressing {TALK/OFF}, the outside visitor can hear
can be heard.)	your voice.
Voice answer mode does not	LYour voice is not loud enough or your initial reply is too long		10
operate properly.	(must be less than 1 second). Try a different voice volume or
	change the length of your answer until the main monitor station
	beeps.
N Ringer tone

Problem	Cause & Solution
The ringer tone for the door	LThe ringer volume is turned off. Turn it on.
station does not sound.

Page

18

N Others

Problem	Cause & Solution	Page
The main monitor station and the	LThe unit does not work during a power failure. The date and	9
door station do not work during a	time may be reset to the default setting after a power failure. In
power failure.	this case, set the date and time using the main monitor station
	again.
L“DEMO MODE” is displayed.	LDemo mode is activated. Change the setting to “OFF”.	23
LYou cannot answer the call.
LThe unit does not work with	LPerform the following operation (Reset).	―
correct operations.	– Press and hold {MENU} and {PLAY} together for about 3
LThe unit does not work properly.	seconds. (Recorded images and the program settings are
	not affected.)
The main monitor station does	LThe plug is disconnected from the power outlet, or it is about to	―
not work.	be disconnected. Disconnect the plug, and connect it securely
LThe display monitor does not	again. If this does not solve the problem, contact our service
display anything.	personnel.
LThe ringer tone does not sound.
LNo voices can be heard.

27