Programming
How to change the function settings
{MONITOR}
{MENU}
{TALK/OFF}
1
2 Press {MONITOR} (OK), then select the desired item by pressing {MENU} (▲SELECT).
3 Press {MONITOR} (OK), then select the desired setting by pressing {MENU} (▲SELECT).
LIn some functions, repeat this operation according to the display instructions.
4 Press {MONITOR} (OK).
LIf “DELETE ALL PICTURES” or “INITIALIZE SETTINGS” is selected (page 23), the confirmation message is displayed. After the message is displayed, press {MONITOR} (YES).
5 To end the setting, press {TALK/OFF}.
Note:
LWhen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen automatically quits.
Function list
The default setting is indicated in bold.
Item (function)
Setting
RECORDING/PLAY SETTINGS
PLAY LAMP | YES, NO |
|
FLASHING | LIf you select “YES”, the PLAY indicator flashes when unviewed images taken | |
| by the door station remain (page 14). |
|
|
| |
PICTURE RECORD | NORMAL (about 2 seconds), DELAYED (about 3 seconds) | |
TIMING | LSelect “DELAYED” at night when the recorded images are difficult to see if the | |
| door station auto recording feature is turned on. |
|
| (You cannot select the setting for door station 1 or 2 separately.) | |
|
|
|
DISPLAY | ALWAYS, 3 SEC |
|
RECORDING DATE | LYou can set the recording time and date and the guidance to be displayed | |
| while viewing the recorded image. |
|
| LWhen “3 SEC” is selected: |
|
| (Directly after being displayed) | (About 3 seconds later) |
|
|
|
UNPLAYED | 5 | 16 JAN 20:00 |
MENU | SKIP | BACK |
22
