Doorphone

Features during a call or while monitoring

Adjusting the display brightness

1 Press {MENU}, then select “BRIGHTNESS” by pressing {MENU} (SELECT).

2 Adjust the brightness by pressing {MONITOR} (DARK) or {PLAY} (BRIGHT).

Hiding the guidance

You can hide the operation guidance and button guidance (page 7).

1 Press {MENU}, then select “GUIDE OFF” by pressing {MENU} (SELECT).

2 Press {MONITOR} (OK).

LThe guidance disappears from the display temporarily. It reappears when you perform another operation.

Adjusting the volume of your voice heard at the door station

You can adjust the volume of your voice heard at the door station by setting the main monitor station.

1 Press {MENU}, then select “OUTGOING VOL” by pressing {MENU} (SELECT).

2 Adjust the volume by pressing {MONITOR} (-)or

{PLAY} (+).

Adjusting the speaker volume

1 Press {MENU}, then select “INCOMING VOL” by pressing {MENU} (SELECT).

2 Adjust the volume by pressing {MONITOR} (-)or {PLAY} (+).

If it is difficult to hear the visitor’s voice due to noise (Press-to-talk mode)

You can speak with the visitor alternately by pressing {TALK/OFF} to switch between the talking mode and the receiving mode.

1 Press and hold {TALK/OFF} for about 2 seconds during a call until a beep sounds. L appears on the display.

2 To speak to the visitor: Speak while pressing and holding {TALK/OFF}.

To hear the visitor: Release {TALK/OFF}.

NTo end the conversation:

Tap {TALK/OFF} (for 0.8 seconds or less).

Note:

LPress-to-talk mode is canceled after the conversation ends.

Using {DOOR KEY} button

When a separate door opener is connected to the main monitor station, you can open the door using the main monitor station.

1 To open the door, press {DOOR KEY} after answering a call from the door station or while monitoring images taken by the door station.

LWhen the door is opened, is displayed.

LDoor opener allows you to open the door for the time specified in “Setting {DOOR KEY} button” on page 20.

Note:

LYou cannot open the door while receiving a call from the door station. LWhen using 2 door openers:

You can open door 1 (door opener 1) when you are talking with door station 1 or monitoring it. You can open door 2 (door opener 2) when you are talking with door station 2 or monitoring it.

11

Page 11
Image 11
Panasonic VL-SV30BX Features during a call or while monitoring, Adjusting the display brightness, Hiding the guidance