Ricoh R10 manual 166, Changing the Operation Sound Setting Operation Sounds

5

Changing Camera Settings

Changing the Operation Sound Setting (Operation Sounds)

The following five operation sounds are made during camera operation.

Start sound	: Sound when the camera is turned on.
Shutter release sound	: Sound when the shutter release button is pressed.
Focus sound	: Sound when the shutter release button is half-pressed and the
	camera focuses on the subject.
Beep sound	: Error sound indicating an operation that cannot be performed.
LevelSound	: When [Level Setting] is set to [Sound] or [Disp + Snd]
	(GP.172), the sound is continually emitted at a set interval
	when the camera is level in shooting mode.
Available Settings	Description
All *Default setting	All sounds on
LevelSound	Only the level sound is emitted.
Shutter	Only the shutter sound and level sound are emitted.
Note ----------------------------------------------------------------------------------------------

If you try to perform an operation that cannot be performed, the beep sound is emitted regardless of the [Operation Sounds] setting.

1Display the setup menu.

• For the operating procedure, see P.154.

2Press the ADJ./OK button " to select [Operation Sounds] and press the button $.

3Press the button !" to select the desired setting.

4Press the ADJ./OK button.

166