3

Other Playback Functions

Correcting the Image Color Tone (White Balance Compensation)

This function allows you to correct the green, magenta, blue and amber color tones in still images you have taken and then record the corrected images.

1Press the 6 (Playback) button.

2Press the ADJ./OK button !"#$ to display the file you want to correct.

3Press the MENU button.

The playback menu appears.

4Press the ADJ./OK button " to select [White Balance Compensation] and press the button $.

The [White Balance Compensation] screen appears. The original image appears at the upper left of the screen, the white balance compensation map is at the lower left,

and the corrected image is shown on the right.

If you select a file that cannot use white balance compensation, an error message appears and you are returned to the playback menu.

5 Press the ADJ./OK button

White Balance Compensation

!"#$ to move the point

 

around the white balance

 

compensation map and adjust

 

the color tones.

 

• Press the button !"#$ to move the

point around the white balanceCancel Ok compensation map. [G] denotes

green, [A] denotes amber, [M] denotes magenta and [B] denotes blue, and the color tones change toward the respective colors depending on the location of the point.

To cancel white balance compensation, press the DISP. button.

Press the D button to reset the color tone while correcting.

132

Page 134
Image 134
Ricoh R10 manual 132, Correcting the Image Color Tone White Balance Compensation