Ricoh R10 manual 158, Display the setup menu, Press the button ! to adjust the brightness

5

Changing Camera Settings

Adjusting the Brightness of the Picture Display (LCD Brightness)

To adjust the brightness of the picture display, follow the steps below.

1Display the setup menu.

•For the operating procedure, see P.154.

2Press the ADJ./OK button " to select [LCD Brightness] and press the button $.

•The screen for setting the brightness appears.

3Press the button !" to adjust the brightness.

•Move the slider on the LCD brightness adjustment bar down to make the

picture display darker and up to make it brighter. The brightness of the picture display changes as the slider is

moved along the bar. Cancel Ok

•To cancel brightness adjustment,

press the DISP. button to cancel the setting and return to the shooting menu.

4When you reach the desired brightness, press the ADJ./ OK button.

• The display returns to the setup menu.

5Press the MENU button or the ADJ./OK button.

Note ----------------------------------------------------------------------------------------------

When [LCD Auto Dim] is set to [On] on the setup menu (GP.175), the picture display dims to conserve battery power if the camera is not moved for approximately five seconds. Move the camera or press any button to return to the original picture display brightness.

158