Ricoh R10 manual 172, Changing the Level Confirmation Setting Level Setting

5

Changing Camera Settings

Changing the Level Confirmation Setting (Level Setting)

When [Level Setting] is turned on, the camera uses a level indicator and sounds to let you know whether the image is level. You can select from the following level confirmation settings. For information on how to use the level function during shooting, see P.62.

Available Settings	Description
Off	The level indicator will not display. The level sound will not emit.
Display	The level indicator will display. The level sound will not emit.
*Default setting
Disp + Snd	The level indicator appears on the screen and a level sound is
	emitted when the camera is level.
Sound	The level indicator will not display. A level sound is emitted when
	the camera is level.

1Display the setup menu.

•For the operating procedure, see P.154.

•You can also press and hold the DISP. button in shooting mode to display the setting menu. If you pressed and held the DISP. button, skip to Step 3.

2Press the ADJ./OK button " to select [Level Setting] and press the button $.

3Press the button !" to select the desired setting.

4Press the ADJ./OK button.

Note ----------------------------------------------------------------------------------------------

•For information on how to use the level function during shooting, see P.62.

•The level function is not available when recording movies or during interval shooting.

•The level sound is not emitted, even when [Level Setting] is set to [Disp + Snd] or

[Sound] and [Vol. Settings] is set to [ ] (Mute).

172