Changing the Exposure

(Exposure Comp.)

The exposure setting enables you to select the brightness level for your picture. Normally, if your subject is centered, backlight compensation is automatically activated, and you can shoot with the correct exposure.

In the following cases, or when you intentionally want to change the exposure, you can adjust the exposure setting. Exposure can be specified in the range from -2.0 to +2.0. Setting the level higher (+) makes the picture brighter and lower (-) makes the picture darker.

For backlighting

When the background is particularly bright, the subject will appear dark (underexposed). In this case, set the exposure level higher (+).

When your subject is whitish

The entire picture will turn out dark (underexposed). Set the exposure level higher (+).

When your subject is darkish

The entire picture will turn out bright (overexposed). Set the exposure level lower (-).

The same happens when you take a photo of a subject in a spotlight.

To change the setting, use the shooting menu or the ADJ./OK button. This section explains easy ways to change the setting with the ADJ./OK button.

To use the shooting menu, see “Using the Menu” (GP.81).

1Press the ADJ./OK button in shooting mode.

2Press the ADJ./OK button #$ until the exposure compensation bar appears.

3Press the button !" to set the exposure value.

You can also press the shutter release button to take a picture.

4Press the ADJ./OK button.

The setting appears on the screen.

1

Various Shooting Functions

109

Page 111
Image 111
Ricoh R10 manual Changing the Exposure Exposure Comp, 109, For backlighting, When your subject is whitish