Ricoh R10 manual 106

1

Various Shooting Functions

Using the Camera Shake Correction Function to Prevent Camera Shake (Camera Shake Cor)

You can prevent camera shake by turning on the camera shake correction function.

At the time of purchase, the camera shake correction function is turned on.

1Display the shooting menu.

•For information on using the menu, see P.81.

2Press the ADJ./OK button " to select [Camera Shake Cor] and press the button $.

3Press the button !" to select [On].

4Press the ADJ./OK button.

•The symbol appears on the screen.

Caution------------------------------------------------------------------------------------------

•The camera shake correction function is not available during multi-shot shooting, long time exposure and movie shooting. If multi-shot shooting or long time exposure is set while the camera shake correction function is turned on, Echanges to F. E disappears when the mode dial is set to 3.

•The camera shake correction function cannot prevent movement of the shooting subject (caused by wind, etc.).

•Effects of the camera shake correction function vary depending on the surroundings.

Note ----------------------------------------------------------------------------------------------

106 The Jsymbol appears when camera shake is likely to occur. (GP.34)