5

Changing Camera Settings

Changing Image Confirmation Time (LCD Confirm.)

Immediately after you press the shutter release button, the still image taken is displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 0.5 second, but this can be changed.

Available Settings

Off (The image is not displayed for confirmation.) 0.5Sec. *Default setting

1Sec.

2Sec.

3Sec.

Hold (The image remains displayed until the next time you half-press the shutter release button.)

1Display the setup menu.

• For the operating procedure, see P.154.

2Press the ADJ./OK button " to select [LCD Confirm.] and press the button $.

3Press the button !" to select the desired setting.

4Press the ADJ./OK button.

Note ----------------------------------------------------------------------------------------------

When [LCD Confirm.] is set to [Hold], the displayed image can also be enlarged (GP.55) or deleted (GP.56).

168

Page 170
Image 170
Ricoh R10 manual Changing Image Confirmation Time LCD Confirm, 168