Ricoh R10 manual Using the ADJ. Mode, Various Shooting Functions

1

Various Shooting Functions

1 Various Shooting Functions

Instructions in this manual to “Press the ADJ./OK button !"#$” indicate that you should press the ADJ./OK button in the up, down, left or right direction. Instructions to “Press the ADJ./OK button” indicate that you should press directly down on the button.

Using the ADJ. Mode

You can assign four functions from the shooting menu to the ADJ./ OK button. The fifth function (AE/AF target shift GP.69) is fixed and cannot be changed.

By using the ADJ./OK button, you can make settings with fewer button operations and without displaying the shooting menu. This is convenient for using frequently used functions.

At the time of purchase, four of the shooting menu functions are assigned. You can use the setup menu to change the assigned functions. Refer to P.171 for changing the assigned functions.

Use the following procedure to use the ADJ. mode.

1In shooting mode, press the ADJ./OK button. Or, press the ADJ./OK button !".

•The ADJ. mode screen appears. If you pressed the ADJ./OK button !" in Step 1, the screen appears with the first setting changed.

•The fifth icon (AE/AF target shift) is fixed and cannot be changed in the setup menu.

2Press the ADJ./OK button #$ to select the desired item.

•The screenshots below are examples of the screen display when [Expo. Cmp], [Wht. Bal.], [ISO], and [Quality] are assigned to [ADJ Btn. Set.1] to [ADJ Btn. Set.4] with the setup menu.

ADJ Btn. Set.1 ADJ Btn. Set.2

AE/AF

AF

AE

OFF

66 (AE/AF target shift) ADJ Btn. Set.4 ADJ Btn. Set.3