3

Other Playback Functions

Straightening Skewed Images (Skew Correction)

You can straighten rectangular objects, such as a message board or business card, shot at an angle, to make them look as if they were shot squarely.

1Press the 6 (Playback) button.

2Press the ADJ./OK button !"#$ to display the file you want to straighten.

3Press the MENU button.

The playback menu appears.

4Press the ADJ./OK button " to select [Skew Correction] and press the button $.

The display indicates that the image is being processed, and then the area recognized as the correction range is displayed with an orange frame. Up to five areas can be recognized.

If the target area cannot be detected,

an error message appears. The original image remains unchanged.

To select another correction area, move the orange frame to the target area by pressing the ADJ./OK button $.

To cancel skew correction, press the ADJ./OK button !. Even if you cancel skew correction, the original image remains unchanged.

5Press the ADJ./OK button.

The display indicates that the image is being corrected, and then the corrected image is recorded. The original image remains unchanged.

Caution------------------------------------------------------------------------------------------

You can use skew correction for still images shot with this camera.

You cannot use skew correction for movies or images taken with S-Cont or M-Cont.

You cannot use skew correction for subfiles with [Sub File Size] set to lower than [N640[VGA]], when shooting a still image with a subfile with [Record Dual Size] set to [On]. (GP.101, 165)

134

Page 136
Image 136
Ricoh R10 manual Straightening Skewed Images Skew Correction, 134