Ricoh R10 manual Shooting Close-Ups Macro Shooting, Press the ADJ./OK button toward N Macro

Shooting Close-Ups (Macro Shooting)

The macro shooting function lets you take shots of subjects that are very close to the lens.

This is good for shooting small subjects because you can shoot up to approximately 1 cm (0.4 in.) away from the front of the lens.

1 Press the ADJ./OK button toward N (Macro).

• N is displayed momentarily at the center of the picture display and then N is displayed at the top of the screen.

2 Compose your picture and half-press the shutter release button.

3 Full-press the shutter release button.

•To cancel macro mode, press the ADJ./OK button toward N again.

Note ---------------------------------------------------------------------------------------------------

•During macro shooting, the minimum shooting distance changes depending on the zoom position. To display the minimum shooting distance on the screen, set [Min. Macro Distance] to [Show].

The minimum shooting distance and shooting range when using the zoom are shown below. (GP.176)

Wide-Angle	Approx. 1 cm	Shooting range: Approx. 28 mm × 21 mm
	(from the front
	of the lens)
Telephoto	Approx. 25 cm	Shooting range: Approx. 63 mm × 47 mm
	(from the front	(when digital zoom is not used)
	of the lens)
		Shooting range: Approx. 13.1 mm × 9.8 mm
		(when 4.8× digital zoom is used)

If you are using the camera for the first time, read this section.

39