Ricoh R10 manual 195, Downloading Images Using the DL-10

Downloading Images Using the DL-10

After installing the software on your computer, connect your camera to the computer.

1Make sure the camera power is off.

2Connect the USB cable to the USB port of your computer.

3Connect the USB cable to the

USB terminal of your camera.

• Your camera turns on and the computer automatically reads the necessary files.

4DL-10 starts and image transfer begins automatically.

•DL-10 automatically creates a folder called [Digital Camera] inside your [My Documents] folder. Downloaded images are saved in folders with the date of each shot, inside the [Digital Camera] folder. (The files will continue to be saved in the [Caplio] folder if you were previously using Caplio Software.) Set the correct date and time on the camera before shooting.

5When image transfer is completed, disconnect the camera and the computer. (GP.198)

Note ----------------------------------------------------------------------------------------------

•For how to use DL-10, refer to the “Software User Guide” (PDF file) contained in the provided CD-ROM. (GP.191)

•If image transfer does not begin, please try the following procedures.

•Click the [Save] button in the DL-10 window. (Only if this is your first time connecting the camera to your computer.)

•Restart your computer and perform Steps 1 to 5 again.

•Confirm that the [Saves automatically when connected to USB] checkbox in the [Option Settings] dialog box for DL-10 is selected.

Downloading Images to Your Computer

6

195