Ricoh R10 manual 152

4

Direct Printing

7Press the button #$ to select the next still image for printing.

8Press the button !" to set the number of copies to print.

9Repeat Steps 7 and 8 to select all the still images to be printed and the number of copies for each.

10Press the ADJ./OK button.

•The Direct Print menu appears.

11Press the ADJ./OK button !" to select an item, and then press the button $ to display the detailed options screen.

•When [Connecting…] is displayed, the connection to the printer is not yet established. When a connection is established, [Connecting…] disappears and [Direct Print] appears.

Proceed with this step after the connection is established.

•For available settings, see P.150.

12Press the ADJ./OK button !" to select the setting, and then press the ADJ./OK button.

•The display returns to the Direct Print menu.

13Repeat Steps 11 and 12 to change other settings as required.

14Press the ADJ./OK button.

•The selected still images are sent to the printer and the [Sending…] screen appears.

•Pressing the DISP. button cancels the operation.

•When all the selected still images have been sent from the camera to the printer, the camera display returns to the Direct Print playback mode screen.

Note ----------------------------------------------------------------------------------------------

•Only images with a printer symbol ( ) are printed. If you cancel printing and then try to print again, make sure that the printer symbol is on the images you want to print.

•The same still image can also be printed several times on a single sheet.

•The available items vary depending on the functions of the printer.

•To print images using the printer’s default settings, select [Printer Select] on the

152 detailed options screen.