Note ---------------------------------------------------------------------------------------------------

Setting your favorite image files to [Flag Function Setting] on the playback menu allows you to easily display these files. (GP.123)

Checking the image in shooting mode----------------------------------------------------

In shooting mode, immediately after you take a still image, the still image is displayed on the screen for a moment so you can check it. You can change the image display time using [LCD Confirm.] on the setup menu (GP.168).

When [LCD Confirm.] is set to [Hold], the image remains displayed until the next time you half-press the shutter release button. When [LCD Confirm.] is set to [Hold], the displayed image can also be enlarged or deleted. (GP.55, 56)

Turning on the camera in playback mode------------------------------------------------

When the camera is off, pressing and holding the 6 (Playback) button turns the camera on. (The camera starts up in playback mode.)

When the camera has been turned on with the 6 button, pressing the 6 button again switches playback mode to shooting mode.

Where images are played back from-------------------------------------------------------

When no SD memory card is loaded, the camera plays back from the internal memory. When an SD memory card is loaded, it plays back from the SD memory card.

If you are using the camera for the first time, read this section.

53

Page 55
Image 55
Ricoh R10 manual Checking the image in shooting mode