Ricoh R10 manual Zoom level appears on the picture display

If you are using the camera for the first time, read this section.

Shooting in Zoom Macro Mode

1Turn the mode dial to SCENE.

•The camera is ready to shoot and the selected scene mode is displayed at the top of the picture display.

2Press the MENU button.

•The scene mode selection screen appears.

3Press the ADJ./OK button !"#$ to select [Zoom

Macro].

4Press the ADJ./OK button.

5Turn the zoom lever toward z (Telephoto) or Z

(Wide-angle).

•The zoom level appears on the picture display.

6Compose your picture and half-press the shutter release button.

7Full-press the shutter release button.

Caution-----------------------------------------------------------------------------------------------

•When using the zoom macro, you can shoot close-ups within the following distances:

Approx. 1cm	Shooting range: Approx. 22.6 mm × 17 mm
(from the front	(when digital zoom is not used)
of the lens)
	Shooting range: Approx. 4.7 mm × 3.5 mm
	(when 4.8× digital zoom is used)

•If [Pic Quality/Size] is set to 3648 × 2736 and [Digital Zoom Img] is set to [Auto Resize], the auto resize zoom is activated. (GP.169)

50