Correcting the Image Brightness and Contrast (Level Compensation)

You can use either [Auto] or [Manual] mode to correct the brightness and contrast in still images you have shot and then record the corrected images. [Manual] mode allows you to correct the image by adjusting the histogram.

Note ----------------------------------------------------------------------------------------------

See P.64 for more information on the histogram display.

1Press the 6 (Playback) button.

2Press the ADJ./OK button !"#$ to display the file you want to correct.

3Press the MENU button.

• The playback menu appears.

4Press the ADJ./OK button " to select [Level Compensation] and press the button $.

Correcting Images Automatically (Auto)

5Press the ADJ./OK button !" to select [Auto] and press the button $.

3

Other Playback Functions

The [Level Compensation] screen appears. The original image appears at the upper left of the screen and the corrected image is shown on the right.

If you select a file that cannot use level compensation, an error message appears and you are returned to the playback menu.

To cancel level compensation, press the DISP. button.

6Press the ADJ./OK button.

Level Compensation

Auto

Cancel Ok

Messages appear during the correction process, and then the

corrected image is recorded. The original image remains unchanged. 129

Page 131
Image 131
Ricoh R10 manual Correcting Images Automatically Auto, Press the ADJ./OK button