Ricoh R10 manual Changing File Name Settings Sequential No, 179

Changing File Name Settings (Sequential No.)

When you shoot a still image, it is stored on an SD memory card or in the internal memory with a consecutively numbered file name that is automatically assigned.

When you switch SD memory cards, you can set your camera to continue consecutive numbering from the previously loaded card.

Available Settings
On (Continue numbering)	File names are automatically assigned to still images you take,
	in the format of “R” followed by seven digits, from
	R0010001.jpg to R9999999.jpg.
	With this setting, file numbering is continued even when the SD
	memory card is exchanged.
Off (Do not continue	File numbering is assigned, from RIMG0001.jpg to
numbering) *Default setting	RIMG9999.jpg, for each SD memory card.
	When the file name reaches RIMG9999, no more data can be
	recorded to that card.

1Display the setup menu.

• For the operating procedure, see P.154.

2Press the ADJ./OK button " to select [Sequential No.] and press the button $.

3Press the button !" to select the desired setting.

4Press the ADJ./OK button.

5

Changing Camera Settings

179