Ricoh R10 manual 154, Using the Setup Menu, Changing Camera Settings

5

Changing Camera Settings

Setting	Options [Default Settings]					Refer to
Date Settings						P.181
Language/N(*)		, English, Deutsch, Français, Italiano,				P.182
	Español,		,	,	,
Video Out Mode(*)	NTSC, PAL					P.183

(*)The default setting varies depending on where you purchased the camera.

Note ----------------------------------------------------------------------------------------------

When the mode dial is set to easy shooting mode, the quantity and order of the items in the setup menu are different from other shooting modes. The contents of the settings are the same as other modes.

In easy shooting mode, [Set Fn Button] can be set to [Off], [Macro Trgt] or [Back.Comp.].

Using the Setup Menu

In the instructions of this manual, the menu selection is confirmed when you “Press the ADJ./ OK button” (as in Step 6 below), but you can also confirm the setting and return to the menu screen by pressing the ADJ./OK button #.

1Press the MENU button.

•The shooting menu (or the playback menu) appears.

2Press the ADJ./OK button $.

•The setup menu appears.

•In scene mode, press the ADJ./ OK button ! once or twice to select the [MODE] tab, and then press the ADJ./OK button $ twice. The setup menu appears.

The menu items are provided on five screens.

3 Press the ADJ./OK button !" to select the desired item.

• If the DISP. button is pressed at this point, the display returns to the screen shown in Step 2.

• Press the ADJ./OK button " at the bottom item to display the next screen.

154