8.3 Setup for the Printer
Select Enable.
Select On for the protocol to be used for NetWare.
Select Save twice.
Select Close twice and then Exit Tools.
The machine will be rebooted.
8.3.2Other Settings
When necessary, adjust the following settings on the printer. However, the factory setting of these items do not need to be changed for normal use.
• | Print Mode | (Factory setting: PCL*) |
• | PJL Switch | (Factory setting: On) |
• | NetWare Receive Buffer | (Factory setting: 256 KB) |
• | IPX/SPX | (Factory setting: On) |
"Chapter 13 Configuring by the Tools Mode Screen" for details on the settings of the printer.
* If the optional PostScript software kit is installed, factory setting will be Auto.
8
