15.4Using NetWare

This section provides information on the possible causes, verifying methods and recommended actions pertaining to errors which may occur when using the printer with NetWare.

15.4.1 The printer is not Printing

Cause

Verification

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Action

The network component is not

Check if the data link lamp of the

 

From the printer, set up the frame

compatible with the auto setup

network component board

 

type specified to the file server

of the frame type.

connected to the printer is on.

 

which you want to connect.

 

Check if the frame type of file

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

server in the network is similar.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is a breakdown in the

Using NWADMIN from the

 

Switch the network cable between

network from the workstation

workstation, check if the target

 

the workstation and printer that

to the printer.

printer object can be seen.*

 

cannot be used for transmitting.

The user name and group name

Using NWADMIN from the

 

1. Re-send the print jobs to a print

are not registered in User of the

workstation, and referring to the

 

 

 

queue which is correctly

print queue.

target queue object, check if the

 

 

 

registered with the user name or

 

user name and group name are

 

 

 

group name at User of Print

 

registered in User*.

 

 

 

Queue Information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Using NWADMIN from the

 

 

 

 

 

workstation, register the user

 

 

 

 

 

name and group name at User

 

 

 

 

 

of Print Queue Information.*

Jobs cannot be sent to the print

Using PCONSOLE, check if Yes is

 

Using PCONSOLE, set it to Yes.

queue.

set up for "User can register with

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the queue" at the Current Queue

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Status of Print Queue Information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jobs cannot be sent to the print

Using NWADMIN from the

 

Using NWADMIN from the

queue.

workstation, check if the operator

 

workstation, check if each item of

 

flag is checked by Recognition of

 

the operator flag is checked by

 

the target print queue.*

 

Recognition of the target print

 

 

 

queue. *

 

 

 

 

The user name and group name

Using NWADMIN from the

 

1. Re-send the print jobs to a print

are not registered in the print

workstation, check if the user

 

 

 

queue which is correctly

server user of the print server.

name and group name are

 

 

 

registered with the user name or

 

registered with the User of the

 

 

 

group name at User of Print

 

target print server.*

 

 

 

Server Information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Using NWADMIN from the

 

 

 

 

 

 

workstation, register the user

 

 

 

 

 

 

name and group name at User

 

 

 

 

 

 

of the target print server.*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

218

Page 232
Image 232
Panasonic DA-PC700 manual Printer is not Printing, 218, Cause Verification Action