3.6Printing vs Copying/

Scanning

The touch panel display will be as follows during printing or transmission.

When Exit is selected on the screen displayed, the next copying/scanning operation can be programmed ahead without disrupting the current printing operations.

The following table explains about the relationship between the printing function and the copying/ scanning function.

Control Panel Operations

Printer Actions

 

 

Defining the copy/scan settings

Cannot print but can receive printing instructions from

 

computers.

 

After a certain time has passed after the settings, the

 

document sent by the computer will be printed.

 

During copying/scanning, printing cannot be done. After

 

these jobs are completed, documents sent by the computer

 

will be printed in the order received.

 

 

Select Exit during printing

Copying/scanning operations can be programmed ahead

 

without disrupting the current printing operation.

 

 

Press Interrupt during printing

Printing will be stopped temporarily and the copy/scan

 

functions can be used. However, printing instructions can be

 

received from the computers. When Interrupt is pressed again

 

to exit the interrupt mode, printing will restart. Even during the

 

interrupt mode, the print processing will start if no operations

 

are carried out after a certain time*. Documents sent by the

 

computer will be printed according to the order received.

 

 

*: This time setting is done from the Tools Mode screen. See "Chapter 13 Configuring by the Tools Mode Screen" for details on the setting method.

38

Page 52
Image 52
Panasonic DA-PC700 manual Printing vs Copying Scanning