13.2 System/Meter Settings
Menu Item |
| Description |
Network Settings (con't...) | ¥ Token Ring: Transmit Rate | |
| Sets the transmit rate of the Token Ring. | |
| Available options: | |
| ¥ | Auto* |
| ¥ | 4 Mbps |
| ¥ | 16 Mbps |
| ¥ | 100 Mbps |
This item is available for selection when the Token Ring is installed.
¥Token Ring: Max Packet Size
Sets the maximum packet size of the Token Ring. Available options:
¥1500 Bytes*
¥2088 Bytes
¥4472 Bytes
¥8232 Bytes
This item is available for selection when the Token Ring is installed.
¥Token Ring: Source Routing Sets the source routing setting. Available options:
¥No
¥Yes*
This item is available for selection when the Token Ring is installed.
Port Settings > | To be set when using the parallel port. | |
Parallel | Items: | |
| ¥ | Port Status |
|
| Defines the setting of the parallel port when the power is on. |
|
| Available options: Disable, Enable*. |
|
| The note items at the end of this tabulation of print/mode settings. |
| ¥ | Print Mode |
|
| Sets the print mode. |
|
| Available option: Auto*, PCL, PostScript. |
| ¥ | PJL Switch |
|
| Sets the PJL commands sent from the host device to valid or invalid. |
|
| Available options: Off, On*. |
| ¥ | Auto Eject Time |
|
| Sets the time to automatically print and output any remaining data in the |
|
| printer when it is in a continuous state of not receiving data. |
|
| Available options: |
| ¥ | Adobe Communication Protocol |
|
| Can be set when the optional PostScript software kit is installed. |
|
| Available options: Standard*, Binary, TBCP. |
| ¥ | |
|
| Sets the bidirectional communication setting. |
|
| Available options: Disable, Enable*. |
|
|
|
|
| * factory setting |
13
