Panasonic DA-PC700 manual 210, Raster for Graphics Mode. Or, Stop

15.1 When Problems Occur

Condition	Cause	Treatment
When printing color	Is the line set to the finest width?	From the "Graphics" tab of the
document, lines might not be		printer properties dialog box, select
printed.		Raster for Graphics Mode. Or
		from the application program, select
		a thicker width for the line or
		darken the color.
No printing is sent but	Is the power of the host computer	Press the Job Status	Stop
displayshows"Printing".	turned on after the printer has been	button to display the Job Status
	turned on?	Check screen. Select jobs with the
		"Printing" status. Then select Stop
		on the screen and press the Clear
		C button on the control panel.
		Check that the power of the
		host device is switched on.
Poor print quality.	There might be an image error.	"15.2 When the Print
		Quality is Poor"
Paper cannot be output.	Data is left in the machine.	Stop printing or force the
		remaining data to be output.
		"3.3 Cancelling Printing
		from Printer";
		"3.4 Forced Outputting"
The paper tray is stuck.	Has the cover been opened and	Switch off the power without
	the power switched off during	forcefully moving the paper tray.
	printing?	After a few seconds, switch it on.
		Check that the printer is in the state
		to receive data and then push in/pull
		out paper tray.
Error code 086-701 or 086-	Has the Memory Changes setting	Press the Job Status	Stop
705 is displayed.	been changed at the Tools Mode	button.
	screen?

210