5.3 Installing the Direct Print Utility

5.3.2Setting the TCP/IP Protocol

The protocol needed to setup the Direct Print Utility port is the TCP/IP protocol. If you try to install the Direct Print Utility without installing the necessary protocol first, the following corresponding dialog box will be displayed:

Follow the procedure below to install the TCP/IP protocol:

The manuals that come with Windows 95/98/Me for details on the way to install the TCP/

IP protocol.

Procedure

Start Windows 95, Windows 98 or Windows Me.

Click Start and select Settings, followed by Control Panel. Double-click the "Network" icon to display its dialog box.

Click Add on the "Configuration" tab dialog.

The "Select Network Component Type" dialog box appears.

Click Protocol in the "Select Network Component Type" dialog box. Then, click Add.

The "Select Network Protocol" dialog box appears.

Click Microsoft in the "Manufacturers" box in the "Select Network Protocol" dialogbox.

A list of protocols appears in the "Network Protocols" box.

Click TCP/IP.

Then click OK.

Click OK on the "Network" dialog box.

Restart the system.

82

Page 96
Image 96
Panasonic DA-PC700 manual Setting the TCP/IP Protocol, Procedure