12.1 Types of Report/List
Printing Content | Remarks |
|
|
PJL Syntax Error | Cause: A PJL command syntax error has occurred . |
| Treatment: Check the printer settings or correct the PJL command. |
|
|
Print LANG Not Installed | Cause: An uninstalled printer language is specified. |
| Treatment: Look at the Printer Settings List to check if the |
| specified printer language is installed. |
|
|
Scan Data Repository ERR | Cause: DNS is not set or DNS address is not correctly set. |
| Treatment: Check whether the DNS address is correctly set. Or |
| use the IP address to set the scan data repository address. |
|
|
Invalid IP | Cause: The IP address set at DHCP is no more effective. |
Expired | Treatment: Check the DHCP environment or set the IP address at |
| the printer. |
|
|
Out of PCL Memory | Cause: As the printer is out of PCL memory, printing cannot be |
| processed. |
| Treatment: Increase the PCL memory setting. |
|
|
PCL Command Error | Cause: A PCL command error has occurred. |
| Treatment: Check the print data. |
|
|
Max. User Number Exceeded | Cause: It is detected that the user number for Security Print and |
| Sample Set documents has exceeded 200 (maximum). |
| Treatment: Delete documents or users that are no more in use, and |
| then print again. |
|
|
Template Syntax ERR | Cause: A job template syntax error for scanning is detected. |
| Treatment: Specify other correct job template or recreate another |
| job template. |
|
|
PostScript LANG Interpret | Cause: A PostScript error has occurred. |
ERR | Treatment: Check the print data. |
|
|
PCL Memory Low, Page | Cause: Lossy compression. Job is very complex, display list |
Simplified | takes up too much memory, decomposer will perform lossy |
| compression. Job can still be printed but image cannot be |
| guaranteed. |
| Treatment: Increase the PCL memory and print again. |
|
|
The result of the printing is shown on the next page.
