Panasonic DA-PC700 manual Configuring by the Tools Mode Screen 191

13.2 System/Meter Settings

Menu Item			Description
Port Settings >	¥	Print Mode
LPD (con't...)		Sets the print mode.
		Available option: Auto*, PCL, PostScript.
	¥	PJL Switch
		Sets the PJL commands sent from the host device to valid or invalid.
		Available options: Off, On*.
	¥	TBCP Filter
		Define the setting of the TBCP Filter when the optional PostScript software kit
		is installed.
		Available options: Disable, Enable*.
	¥ Connection Time-Out
		Define the time-out.
		Available options: 2 - 3,600 sec (16 sec*).
Port Settings >	Items:
EtherTalk	¥	Port Status
		Define the setting of the EtherTalk port when the power is on.
		Available options: Disable*, Enable.
			The note items at the end of this tabulation of print/mode settings.
	¥	Print Mode
		Sets the print mode.
		Available option: PostScript*.
	¥	PJL Switch
		Sets the PJL commands sent from the host device to valid or invalid.
		Available options: Off, On*.
Port Settings >	Item:
Salutation	¥	Port Status
		Sets the salutation port when using the network scanner driver and the mailbox
		viewer.
		Available options: Disable*, Enable.
			This port uses the salutation protocol meant for the
			communication between the Panasonic network scanner driver
			and the mailbox viewer. It is not guaranteed to work when
			connected to any other salutation protocol.
Port Settings >	Item:
FTP Client	¥	Port Status
		Sets the FTP Client port.
		Available options: Disable*, Enable.
Port Settings >	Item:
Internet Service	¥	Port Status
		Define the setting of the Internet Service port when using Internet Service.
		Available options: Disable, Enable*.
			The note items at the end of this tabulation of print/mode settings.
			* factory setting

13

Configuring by the Tools Mode Screen

191