Panasonic DA-PC700 manual Troubleshooting 219

					15.4 Using NetWare
Cause	Verification			Action
The print queue to which the	Using NWADMIN from the	1. Re-send the job to a print queue
job is sent is not assigned to	workstation, check if the target		registered with user name and
the printer.	printer is assigned to the serviced		group name at User of Print
	printer in the list under User of the		Server Information.*
	target print server.*
		2. Using NWADMIN from the
			workstation, check if the user
			name and group name are
			registered at User of the target
			print server.*
The print queue has exceeded	Using NWADMIN from the	Re-send the job to a print queue
the maximum number of	workstation, check if the desired	assigned to the printer.*
supported queues of the printer	print queue is assigned to the
(in the print server mode).	assigned print queue of the target
	print queue.*
The slave file server is not set	Using PCONSOLE from the	Using PCONSOLE from the
up (in the bindery service	workstation, check if the slave file	workstation, reflect the setting
mode).	server is registered in the Service	parameter after having registered
	NetWare Server by the print server	the slave file server.
	of the Print Server Information. *
The print type is incorrect.	Using PCONSOLE from the	Using PCONSOLE from the
	workstation, check if Printer:	workstation, set Printer: Parallel,
	Parallel, Port: LPT1, Position: Auto	Port: LPT1, Position: Auto mode
	mode (local) is defined for Printer	(local) and reflect the parameter.*
	Information > Printer > Printer xxx
	Environment .*
The setting for the slave file	Using PCONSOLE from the	If it is not Defined, change it to
server is incorrect (in the	workstation, check if the printer	Defined and reflect the parameter.*
bindery service mode).	type has been set up as Defined at
	the Print Server Information >
	Printer > Printer xxx Environment
	Setting.*
The paper number of the print	Using PCONSOLE from the	Using PCONSOLE from the
job and that of the loaded paper	workstation, check if the first page	workstation, make the first page
are different.	paper number of the environment	paper number and job number
	setting after selecting the target	similar in the target printer
	printer is similar to the job	environment setting.*
	number.*
Print job data format and		When printing bindery-format file
		using PostScript language, enable
workstation print environment	-
		TBCP at the printer. When using
setting are not similar.
		Windows at the workstation, set do
		not output Ctrl-D.
The level setting for the IPX	At the console screen of the file	At the console screen of the file
checksum is incorrect.	server, execute a set command and	server, enter the following
	check if the IPX checksum is set	command and set the IPX
	to level 2.	checksum to level 0 or 1.
		set Enable IPX Checksum=X
		(X: 0 or 1)

15

Troubleshooting

219