Panasonic DA-PC700 manual When Problems Occur, 208, Condition Cause Treatment, ¥ Others

15.1When Problems Occur

Check the conditions of the printer again before treating it as a breakdown.

If messages are displayed, carry out treatment accordingly.

If the print quality is poor, proceed to "15.2 When the Print Quality is Poor" to carry out the appropriate treatment.

• This printer uses precision parts and high voltage.

Never open or remove machine covers that are secured with screws unless specifically instructed in the Operating Instructions (For Copier). A high voltage component can cause a shock hazard.

•Do not try to alter the machine configuration, or modify any parts. An unauthorized modification can cause smoke or fire.

Condition	Cause	Treatment
No power.	Are the printer breaker switch and	Turn on the printer breaker switch
	power switch turned on?	and power switch.
	Is the power cord securely	Turn off the power switch and
	connected?	check that the power cord is
		plugged in properly.
		Then turn on the power switch.
	Is the power voltage suitable?	Check that the power source is
		120V, 15A; or 220-240 V, 7 A.
		Check that the power capacity
		matches the specified printer
		highest consumption power:
		1.35 kW (120 V model)
		1.20 kW (220-240 V model).
Cannot print.	Is the machine offline or in the	Treat according to the displayed
	setting mode of the Tools Mode	condition:
	screen?	¥ "Offline"
		Select Online from the Print
		Mode screen (Menu screen
		> Print Mode).
		¥ Others
		Exit the Tools Mode screen.
		"Chapter 3 Useful
		Operations";
		"Chapter 13 Configuring
		by the Tools Mode Screen"
	Is there any message being shown	Treat according to the message
	on the display?	displayed.

208