9.1 Introduction
9.1.3Other Setting Items
If necessary, define the following items related to IPP on the Internet Services screen (Properties tab > Protocol settings > IPP). However, there is no need to change the factory setting of these items for normal usage.
¥ | IPP Port Number | (Factory setting: 80) |
¥ | IPP Print Mode | (Factory setting: PCL*) |
¥ | IPP PJL Switch | (Factory setting: On) |
¥ | IPP TBCP Filter | (Factory setting: Disable) |
¥ | IPP Access Control | (Factory setting: Disable) |
¥ | IPP DNS | (Factory setting: Disable) |
¥ | IPP Connection | (Factory setting: 60 sec) |
¥ | IPP Spool | (Factory setting: Hard Disk spool) |
• These settings cannot be defined at the printer touch panel display.
•* If the optional PS3 (PostScript software) kit is installed, factory setting will be Auto.
•Port Number is the port number used for receiving data. It is fixed at 631 and for additional port, you can define the number as 80 or between
•With IPP, you can store the print data output from the application in the spool file of the printer temporarily to be processed for printing. Set the spool mode by using the IPP spool of the receive buffer capacity.
Spool mode:
The mode which stores print data output from the application in the spool file of the printer temporarily to be processed for printing. You can choose to save the spool file in either the RAM disk which has used the printer memory or the hard disk connected to the printer. As the processing of print data after spooling will be done in the printer, the application in the client is released sooner. Requests from multiple clients can be processed at the same time.
Non spool mode:
The mode which processes printing while the print data output from the application is being received by the printer. When the printer is processing printing request from a client, printing request from other clients cannot be received.
•The maximum spool number is 1,000. However, depending on the empty capacity, you may spool up to 200 only.
For non spool mode, if a job is sent when the printer is in sleep mode, the buffer may become full and the printing request may not be completed. When this happens, deactivate the sleep mode of the printer and the printing request will be completed.
