Unpacking Procedures

To unpack the RMON MultiProbe Module:

1.Verify that the RMON MultiProbe Module (Model Number RMON-EMP-3) is the model you ordered by checking the model number listed on the side of the shipping carton.

Note that the product model number printed on the shipping box differs from the model number on the product. The model number on the shipping box contains the prefix ‘3C9’.

2.Remove the module, in its antistatic bag, from the shipping carton.

3.Remove the module from the antistatic shielding bag and inspect it for damage.

Always handle the module by the faceplate, being careful not to touch the components. If the module appears to be damaged, return it to the anti-static shielding bag, repack it in the shipping carton, and contact your local supplier.

Keep the shipping carton and anti-static shielding bag in which your module was shipped so that you can repackage the module for storage or shipment.

2 - 4 Ethernet RMON MultiProbe Module Installation and Operation Guide

Page 32
Image 32
3Com RMON-EMP-3 installation and operation guide Unpacking Procedures