3Com RMON-EMP-3 installation and operation guide Configuring the Module

Chapter 3 — Configuring the Module

Configuration Menu Overview	. 3-2
Modifying Configuration Menu Values	. 3-5
Using the Main Configuration Menu	. 3-6
Using the Download Menu	. 3-9
Using the Modify/View Configuration Values Menu	3-11
Using the Modify/View Serial Configuration Values Menu	3-13
Modem Init Strings and Hangup Strings	3-17
Modem Response Strings	3-19
Using the Modify/View Network Settings Menu	3-20
Using the Modify/View Network Interface Settings Menus	3-23
Configuring the Module and Interfaces	3-26
Assigning the Interface IP Address and Subnet Mask	3-26
Assigning the Module Default Gateway	3-28
Using BOOTP to Configure the Module and Interfaces	3-29
BOOTP Description	3-29
BOOTP Configuration Process	3-29
BOOTP Requirements	3-30
Using BOOTP	3-30
Sample BOOTPtab file	3-30
Assigning Interfaces to Networks	3-32
Using the DIP Switch to Assign Networks	3-33
Using Management Commands to Assign Interfaces to Networks . .	3-35
Management Command Examples	3-36
Saving Network Assignments	3-37
Showing Module and Interface Configurations	3-37
Show Module Command	3-37
Show Port Command	3-38
Re-initializing the RMON MultiProbe Module	3-40
Warm-Starting the RMON MultiProbe Module	3-41
Cold-Starting the RMON MultiProbe Module	3-42

vi Ethernet RMON MultiProbe Module Installation and Operation Guide