3Com RMON-EMP-3 installation and operation guide Using the Main Configuration Menu

Using the Main Configuration Menu

Use the Main configuration menu to:

❑Display the Modify/View Configuration Values menu

❑Download new firmware

❑Initiate a warm or cold start

To display the Main configuration menu:

1.Press the front panel Reset button to re-initialize the module.

2.Hold down the X key within 15 seconds of powering up or resetting the module.

3.If you miss the 15-second window, press the Reset button to re-initialize (warm start) the module.

4.When you hold down the X key, diagnostics are terminated and the following banner is displayed:

Tests interrupted!

Boot System Version x.xx for Ethernet RMON

MultiProbe, Rev x

Built on Thu April x, 17:36:58 EST 199x

Loading configuration system. Entering configuration system. Please wait.....

3 - 6 Ethernet RMON MultiProbe Module Installation and Operation Guide