Samsung CLP-510 Series Netware protocol, Config Netware Netware to On. This item lets you, Card

Item	Explanation
	Options: On*, Off
	You can select whether or not to use the
	Netware protocol.
Netware	If you select On, you can access the
	Config Netware menu item.
	In the Config Netware menu, you can
	specify the frame type parameter used
	on your network.
	Options: Yes, No*
	You can set this item only when you set
Config Netware	Netware to On. This item lets you
	select whether or not you set the frame
	type parameter. Select Yes to select the
	frame type.
	If you select Yes, the IPX Frame Type
	option appears on the display.
	Values: Auto*, EN_8022, EN_8023, EN_II,
	EN_SNAP
	You can select this item only when you
	set Config Netware to Yes. This item
	lets you select the IPX Frame Type.
IPX Frame Type	• Auto: You can set the frame type
	automatically.
	• EN_8023: Select this value to use the
	IEEE 802.3 frame type.
	• EN_II: Select this value to use the
	ETHERNET II frame type.
	• EN_8022: Select this value to use the
	IEEE 802.2 frame type.
	• EN_SNAP: Select this value to use the
	SNAP frame type.
Reset Network	This item reboots the network interface
	card.
	This item performs a simple reset and
Default Set	restores the factory default for the
	network configuration.
Print Net CFG	This item prints a page showing the
	network parameters you set.

2.14 USING THE CONTROL PANEL